Fister 50/50 Release
Architectural Grade Form Release Agent
Fister 50/50 Release is composed of organic chemicals that react with the concrete to prevent adhesion and provides a quick and easy release. This material has a pleasant scent and is free of kerosene, Fister 50/50 Release is a thin amber liquid that remains fluid at sub-freezing temperature and be stored indefinitely.
• Increases form life
• Protects steel form from rust
• VOC compliant
• Virtually no clean up
• Absolutely no staining
Forms must be clean, dry and hardened concrete and any foreign matter removed.
Fister 50/50 Release is ready to use from the container. Apply sparingly with a Scothman fog tip to produce high visual impact concrete. Apply a thin film for maximum protection and economy. Spray uniformly with cross spray to avoid pinholes and uncoated areas. Avoid over application. Prior to coating plywood forms, apply one or two heavy brush coats to edges for waterproofing protection.
Keep away from open flame. Keep away from children. Use in well ventilated areas. Avoid prolonged breathing of vapors. Avoid prolonged or repeated skin contact.
Clean all equipment with soap and water.
|Steel, Aluminum, Plastic and high Density Plywood||1500 - 2500|
|Medium Density Plywood||1000-1500|
|BB Grade Plywood||1000|
Available in 55-gallon drum and 275-gallon tote.
Refer to MSDS
Store in cool dry and well ventilated area.