| EXPOSE IT! Form Retarders | EXPOSE IT! Surface Retarders | MICROGEL | Armorgard 505 & 501 | Q2 50:50 |
Q2 50:50 Fast Dry Form Release
A chemical release agent for concrete that effectively prevents bonding of concrete to steel, aluminum, plywood and composite forms.
Description
Q2 50:50 Form release is composed of organic chemicals
that react with the concrete to prevent adhesion and provides a
quick and easy release. This material has a pleasant scent and is
free of kerosene, Q2 50:50 is a thin amber liquid that remains fluid
at sub-freezing temperature and be stored indefinitely.
Advantages:
- Increases form life
- Protects steel form from rust
- VOC compliant
- Virtually no clean up
- Absolutely no staining
Surface Preparation:
Forms must be clean, dry and hardened concrete and any
foreign matter removed.
Application:
Q2 50:50 is ready to use from the container. Apply
sparingly with a Scothman fog tip to produce high visual impact
concrete. Apply a thin film for maximum protection and
economy. Spray uniformly with cross spray to avoid pinholes and
uncoated areas. Avoid over application. Prior to coating
plywood forms, apply one or two heavy brush coats to edges for
waterproofing protection.
Precaution:
Keep away from open flame. Keep away from
children. Use in well ventilated areas. Avoid prolonged
breathing of vapors. Avoid prolonged or repeated skin
contact.
Clean Up:
Clean all equipment with soap and water.
Coverage:
| Application | Sq. Ft./Gallon |
| Steel, Aluminum, Plastic and high Density Plywood | 1500 - 2500 |
| Medium Density Plywood | 1000-1500 |
| BB Grade Plywood | 1000 |
V.O.C:
450 g/l
Fire/Flammable:
Highly Flammable
Disposal:
Refer to MSDS
Storage:
Store in cool dry and well ventilated
area.
|
|
 |
Also visit Fister Quarries Group, Inc. for Aggregates, Pigments, and Sandblasting Nozzles! |